Mirrorlux Reflectors - Extraordinary Solutions, Real Results

Over its life span, the average double fluorescent light produces more greenhouse gas pollution than an automobile does in a single year. Slash this wastage with the all-new MIRRORLUX REFLECTOR!

Over the last five years, CarbonetiX has helped hundreds of organisations slash their energy costs and reduce greenhouse pollution. With the revolutionary product, Mirrorlux Reflectors, double fluorescent fittings are "de-lamped" and then fitted with Mirrorlux Reflectors to maintain high illumination levels while only using one tube.

The revolutionary Mirrorlux Reflector increases the amount of useful light produced and can be used to cut the energy use of the fitting in HALF.

The Mirrorlux halves the energy use of the fitting by enabling one of the two tubes in the fitting to be removed. While the light output also drops by around 30%, in many cases lighting levels are still adequate and above the minimum standard. If the lighting level is too low, a brighter "quad-phosphor" fluoro tube can be installed - that uses no more power than the tube its replacing - but in most cases will bring lighting levels back to what they were previously with the two tubes.

With fluorescent lighting being so prevalent, it's easy to take it for granted. Yet over its lifetime of 20 years, a typical double flouro fitting in an office will produce around 5 tonnes of greenhouse gas pollution. That's more than a car produces in one year!

A Proven Greenhouse Saver

By switching to more energy efficient measures, such as the installation of Mirrorlux Reflectors, we can help avert potentially damaging climate change by reducing the need to burn so much coal. Here are just a few benefits of Mirrorlux Reflectors:

How much greenhouse pollution would you save and how much money would you save if you could halve the number of fluoro tubes in your building? Use the calculator below to find out.

How much can I save?

See for yourself what the savings would be if you used reflectors in your building. Use the calculator below to get an estimate:

How do I realise the savings?

  1. Undertake an illumination assessment.
  2. Based on the illumination assessment then delamp.

To undertake an illumination assessment you could get in a lighting engineer and spend well over a thousand dollars. Or you can purchase our Delamping Kit, for just $198.67, which shows you how to undertake an illumination assessment and helps you assess where to use reflectors and what type of reflector you need.

Click here to order your Delamping Kit online or phone 1300 553 641.

Delamping KitThe Delamping Kit

The best way to identify what the benefit will be from delamping and using reflectors is to buy our Delamping Kit (pictured right)

This kit is outstanding value and includes:

  1. A professional quality lux meter (our engineers use this model lux meter when undertaking energy audits) to help you identify delamping opportunities
  2. A comprehensive guide to delamping, including how to use the lux meter and how to identify delamping opportunities
  3. Three x 1200 mm standard Mirrorlux Reflectors (suited to the wider fluoro fittings)
  4. Two x 1200mm narrow Mirrorlux Reflectors (suited to the narrower fittings)
  5. A super-bright quad-phosphor fluoro tube
  6. Double sided tape and self tapping screws for reflector installation
  7. A instruction guide on reflector installation
  8. Delamped stickers to put where tubes have been removed (so they aren't replaced by a well-meaning staff member or maintenance contractor).

Once this kit is yours you'll be able to quickly assess and identify delamping opportunities, determine what reflector type best suits your fittings, and demonstrate the usefulness of the Mirrorlux Reflectors.

For one of our engineers to come out and undertake an assessment of the delamping opportunities for your organisation in most cases it would cost you a minimum of $500, and potentially much more, depending on the travel time involved and the size of your facility. Some other lighting consultants would charge a minimum in excess of $1,000. What you get for this outlay is assessment of where you can delamp in one site - and one site only.

With the lux meter and delamping guide in our delamping kit, however, you can take as many assessments as you like. If you were an electrical contractor you could even use it to expand your business by offering delamping services. But not only do you get the lux meter and delamping guide, you get five Mirrorlux Reflectors, a super bright quadphosphor tube (the brightest 36 watt tube available) and the small but important things that make delamping easy and permanent.

Previously we were proud to offer several of the components in the kit separately, at a price that would have come to $256 if we had put them all together (and wouldn't have included the delamping guide). But now we are pleased to offer a break-through price of only $198.67 for our delamping kit (plus postage, handling & GST).

Satisfaction 100% GuaranteedUnconditional Guarantee

If you aren't completely satisfied with the Delamping Kit, we offer an unconditional guarantee. Simply return the lux meter, reflectors and fluoro tube to us within three months of receiving them and we will send your money back! You can keep the rest, including the delamping guide which could save you thousands by eliminating the need to have a consultant engineer assess your lighting.

Ordering Information

Of course, if you have already undertaken an illumination assessment you can order our reflectors directly.
Click here to order your Delamping Kit/Reflectors online or phone 1300 553 641.